A carbon steel coil is a roll of steel made from a carbon steel alloy, primarily iron and carbon, known for its strength, durability, and versatility, used in various industries like construction, automotive, and manufacturing.

Carbon steel plate/sheet refers to flat, thin steel products with a carbon content of less than 0.8%, offering a balance of strength, durability, and cost-effectiveness, used in various applications like construction, manufacturing, and automotive.

Carbon steel seamless pipe is a pipe manufactured from carbon steel, an iron and carbon alloy, without any seams or welds, making it a strong and reliable option for high-pressure and high-temperature applications.

Galvanized steel coil is a steel sheet or strip coated with zinc to protect it from corrosion, typically through a process like hot-dipping where the steel is immersed in molten zinc.

Roofing sheets are a versatile and durable roofing material that can be used on a wide range of projects. By choosing the right type of roofing sheets and installing them properly, you can ensure that your roof will last for many years to come.

PPGI (Pre-painted Galvanized Iron) and PPGL (Pre-painted Galvalume) coils are steel coils that are pre-painted after being coated with either zinc (PPGI) or a zinc-aluminum alloy (PPGL) for enhanced corrosion and weather resistance. Both PPGI and PPGL are used in a wide range of industries such as construction, transportation, and the appliance industry.

Stainless steel plate and sheet are flat pieces of metal, with plate being thicker (6mm or more) and sheet being thinner (up to 6mm), both known for their corrosion resistance and durability, used in various industries.

Stainless steel coil/strip refers to a long, thin strip of stainless steel rolled into a coil, offering continuous lengths and versatility for various industrial applications, known for its corrosion resistance, durability, and strength.

Stainless steel welded pipe is created by rolling flat strips of stainless steel into a cylindrical shape and then welding the seam, offering a cost-effective and versatile option for various applications, particularly in industries requiring corrosion resistance.

H-Beam is an economical cross-section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H".

Angle steel, also known as angle iron, is a steel material with two sides perpendicular to each other and in the shape of a long strip. It is divided into two categories: equal-leg angle steel and unequal-leg angle steel, and the specifications are expressed by the length and thickness of the side.

Hot rolled round steel bar is a solid long steel bar with a round cross section, which is made by high temperature processing. It has various specifications, and the diameter is usually between 5.5 and 250 mm. It has good hardenability, hardness, wear resistance and plasticity.

Carbon steel wire, iron-carbon alloy steel wire with a carbon content of 0.02%-2.11%, can be adjusted in strength and toughness through cold drawing/heat treatment process.

Rebar is a key material widely used in construction projects. It is mainly made of carbon steel or alloy steel and has high strength, good plasticity and weldability.

Tinplate is a thin sheet of steel coated with a thin layer of tin, primarily used for its corrosion resistance and solderability, especially in making food and beverage cans.